|
|
|
| Operating Frequency Selection for Sky-wave Over-the-horizon Radar with 2-D Array |
| Luo Zhong-tao① He Zi-shu① Lu Kun② Chen Xu-yuan② |
①(School of Electronic Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China)
②(Nanjing Research Institute of Electronics Technology, Nanjing 210013, China) |
|
|
|
|
Abstract This paper presents a method of adaptive operating frequency selection for sky-wave Over-The-Horizon Radar (OTHR) with 2-D array by predicting Signal-to-Noise Ratio (SNR) of paths to the area of interest. With the elevation resolution of 2-D array, this method overcomes the incapability of separating multipath/multimode signals for OTHR with 1-D array. For frequency selecting, firstly, sounding equipments and 2-D array record the backscattering data, environment data and ionosphere state data. Propagation paths to the area of interest are deduced for available frequencies based on the ionosphere model and state. 2-D adaptive digital beam forming is employed to suppress interferences and predict the power of echoes. Finally, the paths’ SNR is calculated and the frequency of the maximum SNR is selected as the optimal operating frequency.
|
|
Received: 29 May 2014
|
|
|
|
Corresponding Authors:
Luo Zhong-tao
E-mail: loztsky@163.com
|
|
|
|
|
|
|
2015, Vol. 37 
