最佳容差设计问题的研究——正交内切球优化方法

Abstract
Figure/Table
References
Related Citation (12)

Download: PDF (1284 KB)
Export: BibTeX | EndNote (RIS)

Abstract An optimal tolerance design method is presented. The method uses an initial objective function in the design process, and a close-center objective function for reducing the design time. The orthogonal array optimization method is used in order to simplify the method. The center values and tolerances of design parameters can be determined simultaneously by searching out the radius and center of the biggest inscribed globe. Finally, it is necessary to design center value and tolerance synthetically for reaching the aim of optimal design. Two examples are presented to illustrate that the method is feasible and has superiority.

Key words： Electronic circuit CAD Optimal tolerance design Orthogonal array optimization Inscribed globe

Received: 20 October 1992

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors



	Zheng Huanqun
	Wang Chengxuan
	Wang Yuhung

Cite this article:

Zheng Huanqun,Wang Chengxuan,Wang Yuhung. THE STUDY OF OPTIMAL TOLERANCE DESIGN METHOD -THE INSCRIBED GLOBE METHOD BASED ON ORTHOGONAL ARRAY OPTIMIZATION[J]. , 1994, 16(2): 134-141 .

URL:

http://jeit.ie.ac.cn/EN/ OR http://jeit.ie.ac.cn/EN/Y1994/V16/I2/134