A Calibration Method for Airborne InSAR Applied to Large Areas with Sparse GCPs
Hu Ji-wei①②③ Hong Jun①② Ming Feng①② Zhang Lin-tao①②③
①(Key Laboratory of Spatial Information Processing and Application System Technology, Chinese Academy of Sciences, Beijing 100190, China) ②(Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China) ③(Graduate University of the Chinese Academy of Sciences, Beijing 100039, China)
Abstract：High-precision height acquisition needs to correct the interferometric parameters errors by interferometric calibration for Interferometric SAR (InSAR) system. The traditional interferometric calibration method needs more Ground Control Points (GCPs) to reduce the influence of systematic random errors to the calibration precision, but it is very difficult to dispose GCPs in the field with complicated terrains, some areas probably only have little GCPs or even no GCPs and the traditional interferometric calibration method is inapplicable to this situation. A new calibration method is proposed for airborne InSAR based on block adjustment, which introduces the block adjustment theory in Photogrammetry to the processing of InSAR system calibration, through the joint multi-strip processing the method can be used to calibrate the interferometric parameters for airborne InSAR applied to large areas with sparse GCPs. Moreover, the problem of inconsistent height in the overlapping areas caused by the traditional calibration method is also solved. Finally, a joint calibration is adapted to the simulative data of three strips from the highland and the results confirm the validity and rationality of the proposed method.
胡继伟, 洪峻, 明峰, 张林涛. 一种适用于大区域稀疏控制点下的机载InSAR定标方法[J]. 电子与信息学报, 2011, 33(8): 1792-1797.
Hu Ji-Wei, Hong Jun, Ming Feng, Zhang Lin-Tao. A Calibration Method for Airborne InSAR Applied to Large Areas with Sparse GCPs. , 2011, 33(8): 1792-1797.
2011, Vol. 33 
